fbpx ...

All Appliances Up To 45% OFF

d
h
m
s

Up to 60% Off Used & Open Box Appliances

Oven Repair Services In calgary

When ovens in Calgary start having problems, SMS Appliances is here to help. They offer oven repairs of all kinds and you can be assured that their technicians will arrive to the job efficiently and professionally. Carrying parts for a variety of oven makes and models, as well as oven repair kits, means your oven will be running as good as new in no time. Trusting your oven repair needs to an experienced team like SMS Appliances is sure to help ease any concerns you might have about getting the oven up and running again quickly and safely.

Why Choose Our Service

SMS Appliances Technicians are expertly trained to repair oven in Calgary. Oven often fuses and burnout sensors and circuitry due to high temperatures. With the latest technology and analysis we can identify things that keep your stove working, at the right temperature including control panels, coils, sensors and safety fuses. Our technician are trained for stove repairs. 

Once the issue is identified, full diagnose will be presented, service required and answer all of your questions.

0

Same-day repairs

0

Trained Professionals

0

Get 5-Star Service

0

Affordable Price

Common Oven Problems In Calgary

Stoves won’t turn on or ignite if there’s a problem with the oven surface element, igniter, infinite switch, or a bake or broil element. Bake oven elements glow red-hot when it’s functioning correctly. The heating element won’t glow red if it’s burnt out or if it’s visibly damaged. 
What you can do before giving us a call is inspecting the heating element for holes or blisters. We can use a multimeter to check the bake element’s continuity to determine if we need to replace the part. When it comes to gas ovens that won’t turn on, the igniter is the likely culprit. We can check the state of your igniter and replace it as needed.

Stoves won’t turn on or ignite if there’s a problem with the oven surface element, igniter, infinite switch, or a bake or broil element. Bake oven elements glow red-hot when it’s functioning correctly. The heating element won’t glow red if it’s burnt out or if it’s visibly damaged. 
What you can do before giving us a call is inspecting the heating element for holes or blisters. We can use a multimeter to check the bake element’s continuity to determine if we need to replace the part. When it comes to gas ovens that won’t turn on, the igniter is the likely culprit. We can check the state of your igniter and replace it as needed.

  • When your stove doesn’t heat, it’s likely because of a broken bake element or oven sensor.
  • Another potential issue for why your burner won’t heat is a damaged component or malfunctioning terminal block.
  • The oven element can be checked by preheating the oven. If one heating element isn’t heating, we’ll need to replace the defective one.
  • If the defective element gets replaced and the oven isn’t heating correctly, you may have an electrical issue. 
    A voltage meter can test for continuity by pushing the wires that lead to the heating element.

The control board on your stove is broken when the timer or the program settings are not working. The oven control board controls the temperature of the oven. 

An electronic oven control panel controls the oven when its buttons are used to set the oven’s temperature. Diagnostic codes, also known as fault codes, are displayed when there is a problem with the stove.

If your oven is running too hot, it’s likely the temperature sensor or thermostat that’s defective. The thermostat is part of the main control panel, which regulates the broil and bake elements. It’s located on the back wall inside the oven near the broiler on the top wall. 

For newer model ovens, check the manufacturer’s website or manual to determine the temperature sensor’s proper resistance.

When the stove igniter glows, but it’s not lit, there’s a broken electronic control, temperature sensor, surface igniter, or safety valve. 
In gas ovens, defective igniters can often be spotted when the oven is turned on, and the igniter glows for more than 90 seconds without igniting the flame. 
This indicates a weak igniter and is a sign that it needs to be replaced.

A common issue we’ve seen with newer oven models with self-cleaning functions is that sometimes the door won’t open even after the temperature drops. This can be caused by the malfunction of the oven temperature sensor. Sometimes the oven door won’t open because of the thermostat, door latch, or seal.

Repairman-Fixing-Oven-Stove,With-Screwdriver-In Calgary

Contact Our Oven Repair Technicians Today!

Opening Hours
Mon – Fri: 9am – 5pm
Sat: 10am – 5pm
Sun: 10am-3pm

Address
5855 9 St SE, Calgary

Phone Number
(403) 585 – 2329

Email
calgary@smsappliances.ca

Choose Your Location

What are you looking for in Furnob?
Please type the word you want to search and press "enter"
Shopping Cart
No products in the cart.